Another Dumpster Fire Thread

kasnerd

Danny's Red Headed Step Child
Joined
Aug 15, 2019
Messages
4,791
Hey, who's dumb idea was it to get a 25gal fuel? (it was me)
Idiot....36gal is much better.

tenor.gif
 
Last edited:

AssBurns

will wheel for beer
Staff member
Joined
Oct 1, 2018
Messages
7,959
Age
31
Location
Yucaipa, CA
Hey, who's dumb idea was it to get a 25gal fuel? (it was me)
Idiot....36gal is much better.

tenor.gif
Where are you putting your fuel cell at?
More weight behind the axle the better. 25 gallons in a pre-runner isn't a lot of fuel when you are gettin it for a while. I'm planning on 32 gal behind the axle.
 

4runner DOA

Hold my beer
Staff member
Joined
Oct 2, 2018
Messages
15,882
Location
OC
Where are you putting your fuel cell at?
More weight behind the axle the better. 25 gallons in a pre-runner isn't a lot of fuel when you are gettin it for a while. I'm planning on 32 gal behind the axle.

He's 4wd.
 

kasnerd

Danny's Red Headed Step Child
Joined
Aug 15, 2019
Messages
4,791
Where are you putting your fuel cell at?
More weight behind the axle the better. 25 gallons in a pre-runner isn't a lot of fuel when you are gettin it for a while. I'm planning on 32 gal behind the axle.
it will be mounted as far back as possible, behind the axle. they have someone coming down to laserscan the frame and build a lasercut frame and cage for it. It will likely be a kit available soon. CARB compliant.

/edit LASERS PEW PEW PEW!!!
 

4runner DOA

Hold my beer
Staff member
Joined
Oct 2, 2018
Messages
15,882
Location
OC
it will be mounted as far back as possible, behind the axle. they have someone coming down to laserscan the frame and build a lasercut frame and cage for it. It will likely be a kit available soon. CARB compliant.

/edit LASERS PEW PEW PEW!!!

@eimkeith needs a 2nd gen taco. It's a shame he's on the east coast. I could leave mine for days for r&d
 

madtaco461

BRO-runner
Joined
Oct 6, 2018
Messages
3,803
Age
39
Location
Socal
it will be mounted as far back as possible, behind the axle. they have someone coming down to laserscan the frame and build a lasercut frame and cage for it. It will likely be a kit available soon. CARB compliant.

/edit LASERS PEW PEW PEW!!!

Good chance to get rid of that fugly oem x brace
 

Airdog

Did Your Mom
Joined
Oct 5, 2018
Messages
543
the one that you can twist and bend by hand? yup.
Its actually not that twisty. Tim at DMZ says to leave it in there unless it absolutely needs to come out. When I bought the SUA from him I told him I was gonna take it out....he asked why?? I told him because its weak and flimsy.....he then schooled me about it...so in it stays until I have reason to take it out.
 

kasnerd

Danny's Red Headed Step Child
Joined
Aug 15, 2019
Messages
4,791
Its actually not that twisty. Tim at DMZ says to leave it in there unless it absolutely needs to come out. When I bought the SUA from him I told him I was gonna take it out....he asked why?? I told him because its weak and flimsy.....he then schooled me about it...so in it stays until I have reason to take it out.
its in the way of the new fuel tank and there is a custom cage and frame being made for it. WAY stronger than the recycled microwave and rebar that brace is made from.
 

Stairgod

Two bad decisions away from buying a bulldozer
Joined
Apr 22, 2019
Messages
2,438
Its actually not that twisty. Tim at DMZ says to leave it in there unless it absolutely needs to come out. When I bought the SUA from him I told him I was gonna take it out....he asked why?? I told him because its weak and flimsy.....he then schooled me about it...so in it stays until I have reason to take it out.
It's stock so it must go.
By default it's faulty.
 
Top Bottom