PCTaco
36 Hour Build
- Joined
- Apr 26, 2019
- Messages
- 509
- Age
- 35
How hard could it be?
Should just dana 60 and rear disk it while you're at it.. you know, for funsies.
How hard could it be?
You getting those fancy looking foxes in the picture ?
Should just dana 60 and rear disk it while you're at it.. you know, for funsies.
I didn’t think so. They were kinda funky looking though, bypasses with twin tube resi.Nope.
I've got a set of 14" kings.
Yeah, I'm really not sure what those are for.I didn’t think so. They were kinda funky looking though, bypasses with twin tube resi.
Yeah they have those as an option for bypasses. A lot easier than messing with a wrench and an allen wrench.Definitely looks like those shocks have a clicker on on bypass tube and what looks like one on a hard mounted resi. The remote resis look like one on compression side and one on rebound? Some fuckery going on there.
Hard to tell from a pic, but kinda looks like the spring rate of that pack might be a tad high for a Taco.
Yeah they have those as an option for bypasses. A lot easier than messing with a wrench and an allen wrench.
The whole idea with that resi is to get the shock fluid flowing/cycling to help dissipate the heat better. Kinda like a radiator where the fluid cycles, but the shock is doing the pumping instead of a water pump.
https://www.ridefox.com/product.php?m=truck&t=shocks&p=43
Some fuckery going on there.
Hard to tell from a pic, but kinda looks like the spring rate of that pack might be a tad high for a Taco.
Taco sunday? Any time to get those spindles on my truck? I need to be done and leave no later than 1130Two weekends left until the last big trip of the summer.
Everything seems to be working.
Definitely time to start building a new rear bumper.
Taco sunday? Any time to get those spindles on my truck? I need to be done and leave no later than 1130
It’s Gabbie for scale!
Also, thanks for making me use my brain today. At least it went to a good cause.
Thanks to @skatefreak282 for the assist with a running truck my new Deavers are at the shop and it's time to start building new shackle hangers and front mounts.
She also gets credit for the details on my new rear, which would have sucked in the details otherwise.
What’s the story with the custom GMF radiator core support/ front engine bay cage?
Mine is fuckered up and seriously collapsed
Chop. Chop. Please.
Yes they are, 59.5" eye to eye, 12" of arch. About 2" longer than a taco and 5/8" wider.Those the raptor leafs? How long are they?