Search results

  1. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    I'm interested at least. The shipping might be crazy for somethin like that
  2. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    I wouldn't get rid of it if i was you. They don't exactly make them any better these days except for roller bearings. And well cared for friction slides are almost comparable and like twice as reliable
  3. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    Beach toolbox off to the left?
  4. N

    Firearms bullshit

    If cali .gov had it's way, you'd get more punishment for wanting to carry a gun than you would for actually shooting someone
  5. N

    Dual Battery Setup : LiFePO4 vs AGM vs Deep Cycle, Lead Acid, etc

    You could run the agm in the cab with a fuse box completely separate and just keep enough extra cable to switch between either if one goes out and you need to use something or start the truck
  6. N

    Dual Battery Setup : LiFePO4 vs AGM vs Deep Cycle, Lead Acid, etc

    I think you got it all figured out there. It's a bit of overkill so starts are easy and don't drain it much. Pair that with driving hard/lotsa revs basically anytime there's no cars in front of me (often out here in the hills) and prioritizing light weight with pretty much every mod. My...
  7. N

    Dual Battery Setup : LiFePO4 vs AGM vs Deep Cycle, Lead Acid, etc

    https://antigravitybatteries.com/products/starter-batteries/automotive/ag-24-rs/ i have this in 40 amp hour configuration I got a little charger/tender thing with it just in case but haven't used it yet
  8. N

    Dual Battery Setup : LiFePO4 vs AGM vs Deep Cycle, Lead Acid, etc

    No mods; thought about a voltage monitor of some kind but i haven't even checked it once yet to see how it does :noidea: (at this point i'm a little nervous that i'd start having problems as soon as i did start keeping an eye on it). No idea if it does anything to control temps when charging...
  9. N

    Dual Battery Setup : LiFePO4 vs AGM vs Deep Cycle, Lead Acid, etc

    I've run an AntiGravity LiFePO4 for about a year now in my daily driver 2nd gen taco. Maybe a couple dozen starts around 10 degrees or less a few of them into the negatives, but only this past winter so far. A handful of 3hr+ drives. Makes the starter sound like its on the roids too, cranks...
  10. N

    Welders, welding, and stuff

    If you have patience and attention to detail, buying a TIG only machine can be a sneaky way to get more machine for the money up front. Gonna have to spend a little more time learning. A lot more time prepping the weld and doing the weld, but the versatility and quality is unbeatable by a long...
  11. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    Still drunk from the night before or from whatever you had with your breakfast? Not sure which is worse really
  12. N

    Shock Tech

    Huh kinda closer to what i was thinking than expected. Thanks man!
  13. N

    Shock Tech

    Yeah that'd be cool. Or even just a picture with somethin to compare it to so i can get an idea of where to put one. Garage is runnin out of room but i'm really interested in doing shock rebuilds n valving more for like a side hustle or sumn
  14. N

    Shock Tech

    how big is the Branick 7600 spring compressor? Will it take up a lot of space?
  15. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    You're not wrong for keeping your saw lined up that well. It's just that you'll get the perfect cut... just to have it be anywhere from a hair to an 8th off in a few hours as the temp/humidity changes, and same with whatever the board is being screwed to, and to realize you're measuring with a...
  16. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    The whole idea of buying tools based on the battery and charger you have really only saves you if you only have a few tools. If you have like four tools it'd be way more expensive to get a separate battery and charger for each. If you have an arsenal or you're a tradesman for a living it's not...
  17. N

    Shock Tech

    had fox 2.0s on the rear of my second gen for a while. Even with the valving being a little off the entire time, it's really really underrated how well a 2.0 shock can perform on a tacoma as long as you don't push it too much on hot days n cook the seals
  18. N

    Tools and Shop Talk - Opinions, Thoughts, Reviews, B.S., etc.

    McMaster? Grainger? Would a regular spline drive work with some force?
  19. N

    Shock Tech

    From that article it sounds more like they're part of some grand scheme Holley has :/ Holley makes great stuff and all but idk we'll see if it lasts as they grow
  20. N

    Shock Tech

    if it's not a daily you could definitely go up to the next higher grade of seals (viton, some in between stuff now, those are prob urethane). Might weep slightly in the cold cold and need a rebuild a lil sooner but handle the heat better
Top Bottom