Search results

Save for Part #2.

Hey Dudes, If you have the 3.4L V6 engine with the manual transmission, and you like to turn wrenches, this video might be of interest to you. This video wouldn't have happened without Nick, one of the owners of Yota1 Performance. He's the guy sharing all the tech in the video. Sean and I were...

Why don't you have room for a bigger trans cooler? I was able to fit a Hayden 699 on the front of my 3rd Gen 4runner. Check out the video:

The reason why they aren't much more expensive is they are usually using Dorman hubs paired with different quality bearings. I think a lot of guys choose the better bearing, like from Koyo, and get the Dorman hub. If you actually got an assembly with a Toyota hub, the price tag would go way...

For anyone wanting to swap out just the bearing and retain their hub to save money, watch my video. It is a bit of a pain in the ass, because one of the bearing races usually stays on the hub shaft, but it can be removed with the correct tools and technique.

I was thinking of cutting holes in my hood as well at some point and adding louvers to add additional air flow and heat removal from my engine compartment. I have an aftermarket CBI bumper and winch on the front that does decrease air flow to the cooling fins of the radiator. I also have a big...

This video features the new SST (Special Service Tool) we recommend for doing rear axle seal & bearing jobs. It's made by my buddy Duane who lives in Omaha, Nebraska. There are now lots of Chinese ripoff copies of his tools for sale on Amazon and Ebay. If you going to buy this SST, please buy...

If you're in need of a rear axle seal/bearing job and your rig has ABS, this video will walk you through the steps to properly do the job. In the video, we use a tool made by Durasolid. Since making this video, we found a much better tool to do the job and it is linked in the video description...

If you're in need of a rear axle seal/bearing job and your rig doesn't have ABS, this video will walk you through the steps to properly do the job. In the video, we use a tool made by Durasolid. Since making this video, we found a much better tool to do the job and it is linked in the video...

If you need to pull your rear differential (aka 3rd Member) for a repair, regear, or locker install, this video will show you how to do it.

If your coolant is looking pretty nasty, or a previous owner was using Prestone green and you want to switch back to the Toyota Red, this video will show you how to do a flush of your cooling system. One thing we could have done is remove the thermostat to expedite the flush cycles, but that's...

If your steering rack has bought the farm and you're planning on replacing it, this video will show you how to get it done. Some guys go the aftermarket route and that is a big mistake. Aftermarket steering racks are usually junk. Some come with a lifetime warranty, but what is your time...

Here's a video showing you how to replace the Front Differential Axle Seals on your rig. I found it a struggle to install the seals to the correct depth when I made this video. There is now a tool made by the Wit's End company that makes the insertion to the perfect depth very easy. I feature...

This is a trick that I think a lot of people with automatic transmissions don't know about to keep their transmission running cooler under certain conditions.

Yes, I'm still around. I haven't been on forums that much lately. It's been way more intermittent. I've been creating a bunch more content on my channel lately, so staying pretty busy with that.

Here's a video of us installing a ToyTec Lift on a 3rd Gen 4runner. This would help you install most lifts on a 3rd Gen.

This video shows you how to install a Body Lift on a 3rd Gen 4runner.

Yes, you have to remove the manual hubs to get the CV axles out. If you skim through this video towards the end, you'll see the process to be able to free the CV axle from the hub.

Here's a video of a very popular mod, the Tundra Brake Upgrade.

Nope, no experience with that. Our channel specializes in working Toyota/Lexus SUVs and Trucks. It said to never say never, but I probably won't be doing any videos on hybrids or electric only vehicles. We like gas and diesel powered vehicles.