Search results

  1. miles.less.traveled

    Nano coating for paint

    So what I call a full correction is -through wash -Clay bar/pad -a few steps of compounding depending on the amount of oxidation and paint type -polish step to remove any miro maring from the compounding/cutting process -protective coating. this could be a natural wax, synthetic sealant...
  2. miles.less.traveled

    KOH 2019

    I'll be down there with the 4625 race runner crew. I'm driving my silverado and towing my rzr down. I'll probably head down the 2nd from SLC and drive back the 9th or 10th If anybody wants to car pool or drive down together anywhere between SLC and barstow let me know!
  3. miles.less.traveled

    Nano coating for paint

    vertical facing surfaces.
  4. miles.less.traveled

    Nano coating for paint

    @Dukestaco too late for what? There is a reason they call it paint correction!
  5. miles.less.traveled

    CALLING All AMATEUR (HAM) RADIO NERDS

    Hey gents! Sorry for the lack of response here. I was stuck in my buddies garage all weekend taking care of some more eminent maintenance on my 4unner including: water pump timing belt cam seals crank seal new radiator new rad. hoses new toyota coolant anyways. I purchased this guy and...
  6. miles.less.traveled

    Nano coating for paint

    I don't do paint corrections for my profession but I know my way around a vehicle doing paint corrections and coatings. I've done close to 80-90 full paint corrections for friends/family members/ people who people know that need a good paint refresh and detail over the last 10 years. So other...
  7. miles.less.traveled

    CALLING All AMATEUR (HAM) RADIO NERDS

    So roll back to August 2017. I was gearing up for an international trip and I needed a hard mounted 2m HAM radio. Purchased a nice 50w quad band monitoring. I can (could) listen to our two main group channels, the weather channel for the area and it was august in southern canada so we had...
  8. miles.less.traveled

    lol

    @Theblackflag don't BL. DONT DO IT!:der: and I know what 5.29s mean! :evilgrin:
  9. miles.less.traveled

    What I did to my 3rd Gen today - by rkntoy

    @AssBurns did that nylock nut death when you welded it on the plate?
  10. miles.less.traveled

    lol

    I never asked about the longevity of my heim joints. I'm curious as to why my coil bucket failed. I have witnessed plenty of LT setups (on gen1 taco gen3 4runner gen 1 tundra) that see way more force than what my 4runner and they have their coilover clocked every which way. no rhyme or...
  11. miles.less.traveled

    lol

    @AssBurns I can verify no binding. Correct misalignment spacers are being utilized. so going back to @eimkeith... what do you think is wrong with my setup? What is not in perpendiculardarity?
  12. miles.less.traveled

    lol

    @AssBurns how TF would that make any difference to loads hitting the shock bucket?
  13. miles.less.traveled

    lol

    Are you talking about how the shock upper mount is clocked in comparison to the frame or how the coil bucket is broken?
  14. miles.less.traveled

    lol

    upper mount pivot as in where the UCA pivots? These are unmodified stock buckets. Front suspension work ive done has been 2.5 coilovers and uniball UCAs. I see no reason how this would be any different than stock.
  15. miles.less.traveled

    Wheeler's Thread

    San Rafel Swell of central Utah. Devils Racetrack. Ran from north (coal wash) to south (I-70) I would call it 5-5.5/10 if you pick all the hard lines like I did. (few mediumish ledges and 2 stair sections) Noobs would struggle. Hard core dual locked on 40s would be bored. It was a...
  16. miles.less.traveled

    Outboard Rear Shock Ideas

    Do you think you would hit frame if your kings were 2.5"? I have a good friend that is trying to fit 2.5 radflo rr 8" (really 9") under his rear. He ordered the low range universal kit with 12" hoops and he's being a big ol pussc about notching his frame.
  17. miles.less.traveled

    What I did to my 3rd Gen today - by rkntoy

    Went to discount tire right before closing time with a pickup bed of 33s mounted on wheels. I left with 33s dismounted and bare wheels :evilgrin::evilgrin::evilgrin::evilgrin:
  18. miles.less.traveled

    lol

    Apparently this is what happens to a hair line fractured bucket after a weekend of pounding on it. Had my front tires off the ground more than a handful of times this past weekend and too many steep off camber washout ruts that I probably hit too fast to name. I noticed it while airing up on...
  19. miles.less.traveled

    miles.less.traveled 3rd gen build

    Had an awesome camp spot tucked away in some sandstone cliffs. one of the best sunsets I've seen in a while too! Got a few shots of the milky way in there before the moon came up No trip is complete without a recovery! there was about a 2.5' deep wash out on the edge of this sandy trail...
  20. miles.less.traveled

    miles.less.traveled 3rd gen build

    They had a bunch of rain there recently, it washed out a lot of the sandy trails in the area. One of the trails we did was devils racetrack. Not too difficult but some awesome scenery and lots of fun. You have to know where to place your tries and not drive like a moron but you can get...
Top Bottom