Search results

  1. Airdog

    SoCal BS Thread

    And that panel is the good one....LOL
  2. Airdog

    SoCal BS Thread

    Really wanted to make it to...but the cage install was and still is slow going.
  3. Airdog

    SoCal BS Thread

    Dustin Gerard....dangerousd1987 on IG
  4. Airdog

    SoCal BS Thread

    I just wanted something that gave me a solid 90fps in VR in my flightsim and this card is doing it. VR is so demanding because it’s 2160x2160 res per eye that the card has to put out. The sim is so smooth now with settings that. The high/ultra range.
  5. Airdog

    SoCal BS Thread

    Is $1800 for the card reasonable?? Doesnt feel like it but I did it anyways...plus I had to get a 1000w power supply to go with it...my 750 wasnt good enough. But this thing just purrs along with anygame set to ultra settings
  6. Airdog

    SoCal BS Thread

    Had to cut up my PC case to fit the 4090. My old 2080ti sitting in the 4090 box
  7. Airdog

    4Runner re? build

    Wasnt baggin on you about the travel numbers just didn’t know if you knew the spindle/tie rods could be limiting you Thought I’d point it out. My outer tie rod ends are 3/4 Heims and are my limiting factor for my down travel and the UCA cup is my up travel limiter. So I’m bumped and strapped...
  8. Airdog

    4Runner re? build

    Are you making your own spindles or using stock?? If stock...i'd put your steering tie rods on and see where they bind before you call 15 inches of travel.
  9. Airdog

    4Runner re? build

    These are way better than any autozone tool. Was never skurd using them. But for sure not as nice as your Branick. https://www.summitracing.com/parts/sps-40260?seid=srese1&ppckw=pmax-tools&gclid=Cj0KCQiApKagBhC1ARIsAFc7Mc6mUJgFPLjNApSjAUsiwKc8DI5mQx2S08qI1GIHG5VFnqHnD9VA66saAuchEALw_wcB
  10. Airdog

    SoCal BS Thread

    Here? That trail is closed in the winter time now https://www.fs.usda.gov/detail/sbnf/conditions/?cid=FSEPRD538928
  11. Airdog

    SoCal BS Thread

    From a FB post "Guys the trail is not passable from the entrance off of the 15N There is a boulder in the way. I moved it a bit but it is challenging to navigate around. A mile after the boulder location there is a landslide. The trail is gone. Also two stuck rigs on the other side of the...
  12. Airdog

    SoCal BS Thread

    I'll probably do a day trip on saturday on that weekend like last year
  13. Airdog

    SoCal BS Thread

    Wanna run down to ocotillo tomorrow??
  14. Airdog

    SoCal BS Thread

    Frame boxing complete...lot of fucking work when you gotta pull the bed cage out and the gas tank. On the upside i fixed my gas gauge with a new sending unit while the tank was out.
  15. Airdog

    Timmy the Toolman is in the House!

    No you dont....you live in the most absolute flattest part of Anaslime
  16. Airdog

    SoCal BS Thread

    Howe steering pump and never look back
  17. Airdog

    SoCal BS Thread

    You in Spangler Hills for the week?
  18. Airdog

    Wiring help - new pins for elocker connector?

    Think these are the connectors you need. Google the part numbers
  19. Airdog

    Wiring help - new pins for elocker connector?

    https://www.hi-1000ec.com/phone/product/1370 https://www.corsa-technic.com/item.php?item_id=435
  20. Airdog

    Wiring help - new pins for elocker connector?

    I probably should have dropped this a long time ago somewhere. But its a PDF of every connector and pin on toyotas with part numbers
Top Bottom