AZ bs and swifties anonymous

Blender

Swiftie
Joined
Oct 4, 2018
Messages
2,772
Location
Chandler, AZ
How is the bro truck steering coming along

Ordered the cylinder with a long lead time but will move ahead in parallel. Found some heavy interference in my previous design at the front driveshaft. I think I got it sorted but had to give up some simplicity. Need to detail it out and send out for quote.
 
Joined
Dec 21, 2018
Messages
996
Location
West Phoenix
Camped in Holbrook. Went mostly good except the power awning had a short trying to retract. Was stuck open. Long story short I found a pinched wire at the motor on the awning arm. Other than that all went well. Truck did good but did work with my heavy foot :)
Went up the back way to Prescott last weekend to scout dispersed camp spots. I was really missing my car on those twisty roads and I don't see us getting a decent site if we arrive Friday afternoon. Too many people with the same idea to camp there.

Found a place called White Spar campground. We reserved a site for the weekend after labor day. No hook ups.
Also headed to southern Utah in October, Zion area. 1st night will be at a real camp ground with hook ups then we'll find an offgrid site for the next few nights.

Added a few small upgrades to the trailer to make it our own. Also installed the rear camera so we can see behind us while driving. Although I need to add a drop down bracket so the ladder doesn't hit it. Probably going to get a Honda 2200i Generator which should run the AC if needed. Best part is the cst will be free to me since I do that investment thing with Redox Trades. I withdraw $2K every Monday :)
 
Joined
Dec 21, 2018
Messages
996
Location
West Phoenix
Been tinkering on the trailer.
Adding a larger sink and faucet once it gets here. Put kitchen faucet in the bathroom. Got camera mounted with new drop down bracket and added a full width the taco shop.com dash mount.
I have a single mount is anyone needs it

New sink and stabilizer jacks next week Along with a Honda 2200i.

B3C51407-C5E2-4CE3-B163-859364267043.jpeg71A16BD3-1836-4DEC-9559-196155A693A0.jpeg40927353-5D19-4901-83AD-5406C1B8C024.jpeg1847F536-E4FA-485D-908B-82FE0B710CAA.jpeg573B09CB-4AA8-46F0-9029-F3077489FF16.jpeg4483D786-BCE1-4CEC-9A14-3ADCEC316617.jpeg93B791AB-AC94-4B9F-879C-E39B7A752C45.jpeg
6B6B2A12-C336-4AE8-BFEA-DFB0487CC2EF.jpeg
46396A39-2EBF-46C1-8666-273D1CDF1AAF.jpeg
 

TACOVRD

The Yak
Joined
Dec 21, 2018
Messages
884
Been tinkering on the trailer.
Adding a larger sink and faucet once it gets here. Put kitchen faucet in the bathroom. Got camera mounted with new drop down bracket and added a full width the taco shop.com dash mount.
I have a single mount is anyone needs it

New sink and stabilizer jacks next week Along with a Honda 2200i.

View attachment 27515View attachment 27516View attachment 27517View attachment 27518View attachment 27519View attachment 27520View attachment 27521
View attachment 27522
View attachment 27523

Slick!!
 
Joined
Dec 21, 2018
Messages
996
Location
West Phoenix
Washed the truck and added some cheesy lights inside and to the bed! Patiently waiting for my sliders and suspension to come in!
View attachment 27762View attachment 27763View attachment 27764

Looking good!
Mine is being buffed to remove most of the desert stripping :)

You interested in a phone mount? It's just the plates that mount to the top of the radio bezel. You'd need a ball, arm, and phone holder.

Plates shown here: https://thetacogarage.com/collections/3rd-gen-taco-products/products/dashtop-single-mount-dsm

You'd need this: https://thetacogarage.com/collections/3rd-gen-taco-products/products/slim-grip-kit

I removed mine and added the full length set-up. https://thetacogarage.com/collections/3rd-gen-taco-products/products/dashtop-multi-mount

Free if you want it.
 

azmtnbiker45

Beer, the nectar of life
Joined
Oct 8, 2018
Messages
978
Location
Chandler
I actually have the full length one in my garage. Just need to get motivated and install it. Thanks for the offer!
I have Meso map lights in red if you want them. I decided not to use them and just switch out the bulbs.

Looking good!
Mine is being buffed to remove most of the desert stripping :)

You interested in a phone mount? It's just the plates that mount to the top of the radio bezel. You'd need a ball, arm, and phone holder.

Plates shown here: https://thetacogarage.com/collections/3rd-gen-taco-products/products/dashtop-single-mount-dsm

You'd need this: https://thetacogarage.com/collections/3rd-gen-taco-products/products/slim-grip-kit

I removed mine and added the full length set-up. https://thetacogarage.com/collections/3rd-gen-taco-products/products/dashtop-multi-mount

Free if you want it.
 
Top Bottom