You saw fancy.Anyone interested in buying a powermatic table saw in good condition. It cuts woods and things.
View attachment 12783View attachment 12784View attachment 12785
This saw saws better than any saw ever sawed. Anything you see you will saw. Cast iron top. Newer extension table with router cutout, and legs like Taylor Swift’s. If you don’t have one of these, you need one. All the chicks will want to do stuff to you if you have it.
I also have an overhead extractor and a dust collector for sale...
$1200 to anyone here. $1400 with all accessories (overhead extraction arm and dust collector)
New saw forces sale.
Anyone interested in buying a powermatic table saw in good condition. It cuts woods and things.
View attachment 12783View attachment 12784View attachment 12785
This saw saws better than any saw ever sawed. Anything you see you will saw. Cast iron top. Newer extension table with router cutout, and legs like Taylor Swift’s. If you don’t have one of these, you need one. All the chicks will want to do stuff to you if you have it.
I also have an overhead extractor and a dust collector for sale...
$1200 to anyone here. $1400 with all accessories (overhead extraction arm and dust collector)
New saw forces sale.
Almost bought one of those a few years ago - still on the want list but just don't have the room for it in the existing shop.
GLWS for an awesome saw!
I saw what you did there
Not sure what I did.....
Those Sawstops are pretty trick and certainly can prevent a life altering injury.
How much do you want for them? ADD or manual?Anyone interested in 1st/3rd gen front diffs. I have two both are 4:10. HMU and we can deal
Well it's time to let one of the Runners go so here is the ad:
Selling our 2000 4Runner, 5speed, 4x4, Rear Locker, Desert Dune w/ brown and Oak interior, 265k miles. One family owned and I am the 3rd owner. Was not planning on selling but home repairs force sale. In the last year we have done a lot of maintenance. All work done with Toyota parts or OEM parts.
Timing Belt, water pump, cam and crank seals
Radiator, with upper and lower hoses, OEM Thermostat.
Red Toyota Coolant
AC has just gone through with new Denso Evaporator and dryer
Plugs and wires
Valve cover and intake gaskets
Tundra front rotors and Calipers 13wL’s
Rear axle seals and brakes
Asin Brake Master Cylinder
Front Billistein 5100 Tundra’s with TRD Pro oem springs
Rear - LC 8 wraps and Shocks
Rear PKC by Eimkeith
Asin Clutch kit
Asin Clutch master cylinder and slave cylinder
New Dynomax muffler
Weathertech front mats
Cons: Steering Rack is leaking
Asking $7500
Message me or call 520-four,four,zero-4402
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
Untitled by Sam Wright, on Flickr
They are both add, from a 97 & 98 4Runner. One has 140k , the other 195k. I’m cool with $100 a piece or both for $150. Both come from runners I owned, one I parted out and the other is from a gear swap on my current vehicle. I have other miscellaneous bits too.How much do you want for them? ADD or manual?
Interested. Let me make a few phone calls.They are both add, from a 97 & 98 4Runner. One has 140k , the other 195k. I’m cool with $100 a piece or both for $150. Both come from runners I owned, one I parted out and the other is from a gear swap on my current vehicle. I have other miscellaneous bits too.
to rock dog” sad she’s got to go, glad it’s for a first gen “!!!
Yeah man, I’m thinking of going to the meet up at freddys tomorrow evening orange grove and thornydale.Interested. Let me make a few phone calls.
No I still have them in the truck that is sitting on jack stands. They were going to go into my 4runner but now that I have a running crawler I probably wont go that direction. I need to take those 3rd members out and put the Tacoma back to stock.@stumbles did you ever sell your lockers?