Just notice yesterday my drivers side is bent fuck dammit lol.
Duke's 4runner and other vehicles build
- Thread starter Dukestaco
- Start date
And you need to work on your cursing skills. That's some white boy shit named Skyler crap right there.
I'll just get two sets when Keith gets em done. I'll do mio and we can do you o.
Working up the energy to go slap my upper links and bumps on. Have fun.
I've seen stock links bent (not me) so anything helps. I've also bent 1.75" OD links and panhard. I'm actually afraid to take it out with these 2" links until @eimkeith finishes his reinforcements. Haha.
That's why I keep asking if the are about to come out. I don't want to destroy the stock ones.
You won't with the stock links. I only bent my shock mount after miles and miles of abuse and a couple sketchy jumps because I was going too fast for my setup. The frame side lower link mounts I destroyed playing in rocks, but my axle side was fine. With my beefed up links and rod ends I'll likely bend the axle side since the frame is califab mounts.
You did a great job cutting those down to fit just right. Where did you pick up the replacement bushing from? I'm ready to do mine but my bushing are already shot as they are and don't want to melt them.
SlashX
fucken bitch
- Joined
- Oct 21, 2018
- Messages
- 2,118
Using the stock bushings. Spot welded around the bushings to keep it cool. I have Torched bushings out before and it takes allot to melt them. Got the front done today. Working tonight so hopefully I get a call from Curtis wile I am gone that he has some bumpstops for me when I get back. Don't want to take the rear apart twice if I don't have to.
Got the SPC's with the new axxis bushings for $525
Don't gotta take the rear apart to put the bumps on.
I don't know what they look like but I was thinking it would be the bumps inside the coils. It must be the bumps outside the coils on the frame
@Brindybot now that I have some practice doing those rear link reenforcement we can make you a set. I picked up the angle iron from the remnant pile. It was $12.
Metal tech 3" with super bump vs durabump. It's on the outside of the frame. The thing your thinking is the coil isolators. They keep the metal coil off the metal frame.
I am new to the t4r so yes the coil isolator is what I was thinking about.
