Firearms bullshit
- Thread starter Itaro
- Start date
HavingaGoodTime4x4
FUCK CANCER
Whiskey?
That can be arranged
HavingaGoodTime4x4
FUCK CANCER
I'll drink to that!
Oneputtblunder
Matt
300 PRC build starting to come together
Action ordered Defiance Ruckus
Optic ordered pending shipment(backorder) Razor HD Gen 3 with Spuhr mount
Barrel en route Bartlein m24 contour
Still need chassis trigger and will prob grab a dedicated bi pod for this vs swapping one of my existing atlas
Action ordered Defiance Ruckus
Optic ordered pending shipment(backorder) Razor HD Gen 3 with Spuhr mount
Barrel en route Bartlein m24 contour
Still need chassis trigger and will prob grab a dedicated bi pod for this vs swapping one of my existing atlas
HavingaGoodTime4x4
FUCK CANCER
Little music in the morning
Lol
Last edited:
Notcrow-of-judgement
Definitely not a government drone
- Joined
- Mar 14, 2019
- Messages
- 3,584
Come on by. I’ll tell you more.
Notcrow-of-judgement
Definitely not a government drone
- Joined
- Mar 14, 2019
- Messages
- 3,584
Need a 3-9x90 scope for a new savage axis 6.5 creedmoor I picked up, it's going to be a backup / loaner gun so I'm keeping a tight budget on it.
So far I've narrowed it down to either a Bushnell banner or a vortex crossfire 2...
Anyone have experience with either of those two?
So far I've narrowed it down to either a Bushnell banner or a vortex crossfire 2...
Anyone have experience with either of those two?
I'd have to open the safe and I'm being lazy tonight but pretty sure my vortex is the 3-9 crossfire 2. If it is, I love it. I've actually got it on my .22 and it hasn't lost it's 0 in many trips out.
Check out the primary arms stuff.
I run a trijicon on ar-10 and this
...on a savage scout 308. The primary arms has been comperable to the trijicon dare I say.
I also have a weatherby vanguard (similar to savage axis) 308 with a vortex viper 4-16 x44 and I think you get more bang for the buck from primary arms. They seem better built, thicker material or something and the turret adjustments are way more pronounced. I use the 1-8 and first focal plane for hunting thick brush and out to 5-600yds. I would definitely go for more magnification if your target shooting but you have to ask yourself what do you really expect from a budget optic on a budget gun.
That said the vanguard with a composite stock, bed job, timney trigger, brake, and custom loads is a "tack driver" and easily shoots to 1k if you can.
And I think the vortex fogged on me and I had to send it in for service or replacement.
I run a trijicon on ar-10 and this
...on a savage scout 308. The primary arms has been comperable to the trijicon dare I say.
I also have a weatherby vanguard (similar to savage axis) 308 with a vortex viper 4-16 x44 and I think you get more bang for the buck from primary arms. They seem better built, thicker material or something and the turret adjustments are way more pronounced. I use the 1-8 and first focal plane for hunting thick brush and out to 5-600yds. I would definitely go for more magnification if your target shooting but you have to ask yourself what do you really expect from a budget optic on a budget gun.
That said the vanguard with a composite stock, bed job, timney trigger, brake, and custom loads is a "tack driver" and easily shoots to 1k if you can.
And I think the vortex fogged on me and I had to send it in for service or replacement.
Last edited:
Notcrow-of-judgement
Definitely not a government drone
- Joined
- Mar 14, 2019
- Messages
- 3,584
I'm guessing 200 yards will be the absolute furthest I take this thing out to so I'm not expecting much.
On the other hand, it would be a neat waste of money to see just how accurate I could get a >400 gun
Oneputtblunder
Matt
Current record i know of is .3 moa groups out of a rem 700 a buddy has $4 invested in. It's dubbed the PPR poverty precision rifle
Notcrow-of-judgement
Definitely not a government drone
- Joined
- Mar 14, 2019
- Messages
- 3,584
Vortex scope came today, the axis has a 2 piece scope mount and the scope is maybe an inch too short to clear the scope mounts, Ordered a 1 piece pic rail today that should be in Monday. Kind of a bummer, I'm rather excited to get some rounds down range
Oneputtblunder
Matt
Given how far out everyone seems to be I'm kinda shocked I found this in stock at one of Bartleins distributors. 
Notcrow-of-judgement
Definitely not a government drone
- Joined
- Mar 14, 2019
- Messages
- 3,584
What's the process like to drill them out and doing the rifling?
Oneputtblunder
Matt
The barrel is rifled already. Next step is once my action arrives I'll bring both to a local custom rifle builder and he'll ream the chamber for 300 prc and cut the fitment to my action.
W
What barrel length, stock, trigger and brake you going for?
Oneputtblunder
Matt
Barrel will be 26 inch finished length 1 in 9 twist.
MDT ACC chassis.
TriggerTech diamond
Brake will be TBAC CB brake for my ultra gen 2. May add a magnus in the future too
Pretty much a F my wallet build
Last edited: