Another Dumpster Fire Thread

Stairgod

Two bad decisions away from buying a bulldozer
Joined
Apr 22, 2019
Messages
2,442
That’s beef right there. Confucius says “in time the next weakness will be revealed “
Honestly I have no clue where the weak link is after the inner tie rod.
With the double shear tabs on the knuckle and the slide rack, it should be bullet proof. I have only had to replace 3 bent inner tie rods in 5 years of heavy crawling but it will be nice to not worry about and no need to carry a spare now.
 

Dukestaco

Stirring the pot 24/7
Joined
Oct 3, 2018
Messages
7,472
Location
Tucson
Honestly I have no clue where the weak link is after the inner tie rod.
With the double shear tabs on the knuckle and the slide rack, it should be bullet proof. I have only had to replace 3 bent inner tie rods in 5 years of heavy crawling but it will be nice to not worry about and no need to carry a spare now.
Hopefully it isn’t going to be the steering rack it self.
 

Stairgod

Two bad decisions away from buying a bulldozer
Joined
Apr 22, 2019
Messages
2,442
20211003_145500.jpg20211003_145634.jpg
Had to lose the front tube from the JD Fab set up for skid clearance.
Made some modifications to my SPC UCAs due to bending one and because setting camber is a PITA. The bolt and nut set up allows me to leave the truck at ride height and slide the BJ in and out to set camber. Pleased with how it worked out when I set my alignment.
 
Top Bottom