kasnerd
Danny's Red Headed Step Child
- Joined
- Aug 15, 2019
- Messages
- 4,791
don't drunk buy anythingI’m drunk. Wish I was wheeling. It’s hot af tho so maybe this is better.
don't drunk buy anythingI’m drunk. Wish I was wheeling. It’s hot af tho so maybe this is better.
don't drunk buy anything
don't drunk buy anything
Mall cred is expensive yoSays the man that spent 40k on his truck sober.
Alright. I used an existing BD switch for a pair of s2’s that we never use to run my kdss off switch. Just abandoned the trigger wire and tied the harness to the switch. This is temporary (lololol) until I get a Toyota switch.
Oh I can’t upload the video. Oh well.
Sent it a little hard. I rebuilt my UCA with new bushings and ball joint. Checked everything else. Dirt King said they have a lot of Toyotas come in with bent through bolts which allows the arm to clunk. Plan is to throw a new through bolt in and if that fixes it double shear the mount. Stupid Toyota design. THE CLUNK IS DRIVING ME NUTS
I replaced the bolt last night. Haven’t driven it enough but I don’t think it’s fixed. The cv has slight in/out play whereas the driver is tight. Is that gonna be the issue? I always figured a cv has to have a little movement or else it’ll just pop outta the diff at full droopJesus. Ive caught air plenty of time and haven't bent an UCA bolt. Haha
Shhhh. No. It has bushings and ball joints. The only spherical bearing is the king rod end.those are race truck noises
I replaced the bolt last night. Haven’t driven it enough but I don’t think it’s fixed. The cv has slight in/out play whereas the driver is tight. Is that gonna be the issue? I always figured a cv has to have a little movement or else it’ll just pop outta the diff at full droop
Installed new through bolt for the uca. Seems to have fixed it. Also did new Siberian bushings for the sway bar. Feels TOIGHTThere's always a bit of slop in the axles. If it's not leaking it's probably fine.