Shock Tech

Joined
Apr 22, 2019
Messages
1,380
I did order them with 700s from the get go but it does seem like the rebound is pretty high in comparison.
I got my fronts from DSM. When I called to order them they swapped in the 700# springs and sent them out the same day. Knowing very little about valving(which I still have extremely limited knowledge) I wondered how they could use the same valving with the two different spring rates.
 

4runner DOA

Hold my beer
Staff member
Joined
Oct 2, 2018
Messages
13,486
Location
OC
I got my fronts from DSM. When I called to order them they swapped in the 700# springs and sent them out the same day. Knowing very little about valving(which I still have extremely limited knowledge) I wondered how they could use the same valving with the two different spring rates.
Makes sense. Need to make a call to ADS still, just haven't had time.
 
Joined
Oct 6, 2018
Messages
3,224
Age
36
Location
Socal
As much as tw annoys me there is good info there. Just need to get more of that info here.

View attachment 41579
I was just going to say that changing your spring valve doesn't mean you need to change your damping. You can still be in the range of what the shock can tune out. Mass-Spring-Damper is where all the calculations come from.

 
Joined
Apr 22, 2019
Messages
1,380
I was just going to say that changing your spring valve doesn't mean you need to change your damping. You can still be in the range of what the shock can tune out. Mass-Spring-Damper is where all the calculations come from.

Greater than a 10% change of spring rate doesn't necessarily mean a change in valving?
 
Top Bottom