GreenMachine
Head Supervisor a.k.a. 4x4Banger
- Joined
- Oct 15, 2018
- Messages
- 216
- Age
- 34
Whatsup motherfuckers!?!
Just overlanding hard. How you going?Whatsup motherfuckers!?!
Wishing I was over landing hard, lol!! Not much just work, bills, sleep, repeat. Lol!Just overlanding hard. How you going?
I was stuck in the same rut after my kid was born. As soon as he was able to camp I made it a point to get out and do stuff. It slowed things down quite a bitWishing I was over landing hard, lol!! Not much just work, bills, sleep, repeat. Lol!
Yup all your problems are alcohol related#fakenews #covidisntreal
Yup all your problems are alcohol related
Hope they work as good as I was telling you lol.@AssBurns thanks for telling me about these tie down systems. Just got these today.
https://www.amazon.com/dp/B00JKPFMKE?ref=ppx_pop_mob_ap_share
No poop!? Bad news!Wishing I was over landing hard, lol!! Not much just work, bills, sleep, repeat. Lol!
Check your brake pads. Is the noise speed related or suspension movement?With my gussets on the spindles and a bad alignment do you guys think that would cause the rotor to rub ? I have a bad grinding noise coming from the front end
Suspensión related would be my guess .. I hear it at low speeds but it's a really hard grinding noiseCheck your brake pads. Is the noise speed related or suspension movement?
Suspensión related would be my guess .. I hear it at low speeds but it's a really hard grinding noise
New office is coming together.
Huge shout out to @kasnerd for spending his time to help get the network setup, and letting me borrow tools to get it done.
View attachment 37726View attachment 37728
It's all about the tools! (ourselves included) Remember kids... Orange Green Blue Brown!New office is coming together.
Huge shout out to @kasnerd for spending his time to help get the network setup, and letting me borrow tools to get it done.
View attachment 37726View attachment 37728
Sounds like it could be a wheel bearing. Of you find no obvious metal on metal contact anywhere, you can put the front wheels in the air and grab the wheel at 12 o’clock and 6 o’clock and check for any play, which would indicate a worn wheel bearing (this test works for UBJ too).Suspensión related would be my guess .. I hear it at low speeds but it's a really hard grinding noise
I just put everything in new on the spindles ... I'll lift the truck up later .... been wrenching in the 48 and I'm beatSounds like it could be a wheel bearing. Of you find no obvious metal on metal contact anywhere, you can put the front wheels in the air and grab the wheel at 12 o’clock and 6 o’clock and check for any play, which would indicate a worn wheel bearing (this test works for UBJ too).
"Orange Green Blue Brown" only works when you look at it from the right direction lolIt's all about the tools! (ourselves included) Remember kids... Orange Green Blue Brown!