The Mall Crawler Build Gen 2.5 Tundra

Migraine

WTF do you mean I can't post that?!
Joined
Nov 19, 2019
Messages
1,556
Location
The Armpit of the PNW! Ego puto hoc mundo est
Well maybe it will not be a mall crawler, but it will not be a hard core off road rock crawler, its a gen 2.5 Tundra for Christs sake!
The First mod we did was add 2019 TRD Pro Black head lamps and Trd Dual exhaust
Mod #2 was the ARB summit bumper and Warn Winch
Mod #3 a necessary mod for mall crawling, blvd cruzing, and daily driving is 15% window tint front ant 5% rear
Mod #4 Was the TRD CAI
Mod #5 Get rid of chrome door handles and mirror caps
Mod #6 Was a 3" lift upfront 6112's with coach builder shims and bump stops, in the rear 5160's 3" coach builder shackles, with a CB drop.
Mod #7 took forever for them to arrive P&P type 4 rock sliders they are AMAZING
Mod #8 A magnum rear bumper with BSM had to grind a bit of one the mounts on the Tundra to get it to fit right.
Mod #9 Ajt Vent Ring covers these things are NECESSARY
Mod #10 New North Star battery, with tie down and multi tap terminals.
Mod #11 Remote Start from Randy James Taylor
Mod #12 Custom Steering wheel CZD automotive
Stuff in boxes....
Full RCI skid plate
SPC upper control arms
ABS shields
Full width under rear boom stick vault
Drivers side assist handle
Alpine Ilx-309
Spod Bantam
Full speaker set sub and amp from Randy James Taylor
Pop and Lock
Driving lights from Stedi Australia
Ditch Lights from Rango
18" Black Rhino Madness wheels and 35" K02 tires
5.29 gears front and rear Auburn Pro in the rear.
Differential breather relocation
Jowett Billet Oil filter cap, with drain. Brian is the man!

20190729_185645.jpg
 

Attachments

  • 20190730_162504.jpg
    20190730_162504.jpg
    494.7 KB · Views: 9
  • 20191011_160728.jpg
    20191011_160728.jpg
    347.3 KB · Views: 9
  • 20191013_181742.jpg
    20191013_181742.jpg
    261.1 KB · Views: 9
  • 20191022_205848.jpg
    20191022_205848.jpg
    122.6 KB · Views: 8
  • 20190924_101007.jpg
    20190924_101007.jpg
    234.6 KB · Views: 10
  • 20190817_074920.jpg
    20190817_074920.jpg
    517.6 KB · Views: 10
  • Current.jpg
    Current.jpg
    229.5 KB · Views: 12
  • Blackrhino Madnesss.jpg
    Blackrhino Madnesss.jpg
    53.7 KB · Views: 11
  • overhead.jpg
    overhead.jpg
    632.3 KB · Views: 12
Last edited:

Dukestaco

Stirring the pot 24/7
Joined
Oct 3, 2018
Messages
7,472
Location
Tucson
Well maybe it will not be a mall crawler, but it will not be a hard core off road rock crawler, its a gen 2.5 Tundra for Christs sake!
The First mod we did was add 2019 TRD Pro Black head lamps and Trd Dual exhaust
Mod #2 was the ARB summit bumper and Warn Winch
Mod #3 a necessary mod for mall crawling, blvd cruzing, and daily driving is 15% window tint front ant 5% rear
Mod #4 Was the TRD CAI
Mod #5 Get rid of chrome door handles and mirror caps
Mod #6 Was a 3" lift upfront 6112's with coach builder shims and bump stops, in the rear 5160's 3" coach builder shackles, with a CB drop.
Mod #7 took forever for them to arrive P&P type 4 rock sliders they are AMAZING
Mod #8 A magnum rear bumper with BSM had to grind a bit of one the mounts on the Tundra to get it to fit right.
Mod #9 Ajt Vent Ring covers these things are NECESSARY
Mod #10 New North Star battery, with tie down and multi tap terminals.
Mod #11 Remote Start from Randy James Taylor
Mod #12 Custom Steering wheel CZD automotive
Stuff in boxes....
Full RCI skid plate
SPC upper control arms
ABS shields
Full width under rear boom stick vault
Drivers side assist handle
Alpine Ilx-309
Spod Bantam
Full speaker set sub and amp from Randy James Taylor
Pop and Lock
Driving lights from Stedi Australia
Ditch Lights from Rango
18" Black Rhino Madness wheels and 35" K02 tires
5.29 gears front and rear Auburn Pro in the rear.
Differential breather relocation
Jowett Billet Oil filter cap, with drain. Brian is the man!

View attachment 16042
Is the last picture the sex cam angle. You could have charged the railbed renters by the customer and then sold the videos of the nightly escapades. Lol. Good to see you getting dirty doing the install.
 

Migraine

WTF do you mean I can't post that?!
Joined
Nov 19, 2019
Messages
1,556
Location
The Armpit of the PNW! Ego puto hoc mundo est
Fucking junk from the country that brought us Covid-19 and Joe Biden. The steering wheel from CZD has lasted a bit over 18 months and the Carbon fiber is now de laminating. They want the wheel back before they will make an exchange. I bought a used wheel out of a 2019 4runner, it listed as WHEEL only, so I found some black controls out of a 2019 4runner. A pleasant surprise the wheel and controls arrived today, from different vendors, the guy who sold me the wheel sent a note. I was not a bitch when he told me the parts were extra, I just said okay, understand will reuse my old ones, great price on the wheel and thanks hon. He stated in his note that I was the nicest caller he had had in weeks that he threw in the controls. So which ones to use? I am kinda torn between black and gun metal20210202_185003.jpg
 
Last edited:

Itaro

Seriously, FJB
Joined
Oct 5, 2018
Messages
13,115
Fucking junk from the country that brought us Covid-19 and Joe Biden. The steering wheel from CZD has lasted a bit over 18 months and the Carbon fiber is now de laminating. They want the wheel back before they will make an exchange. I bought a used wheel out of a 2019 4runner, it listed as WHEEL only, so I found some black controls out of a 2019 4runner. A pleasant surprise the wheel and controls arrived today, from different vendors, the guy who sold me the wheel sent a note. I was not a bitch when he told me the parts were extra, I just said okay, understand will reuse my old ones, great price on the wheel and thanks hon. He stated in his note that I was the nicest caller he had had in weeks that he threw in the controls. So which ones to use? I am kinda torn between black and gun metalView attachment 33175
Black.
 

Migraine

WTF do you mean I can't post that?!
Joined
Nov 19, 2019
Messages
1,556
Location
The Armpit of the PNW! Ego puto hoc mundo est
Cab rack installed! Sherpa Equipment Co, the rack is a Big Bear for the cab and a Crows Nest for the cap. The worst part was drilling 8 holes in the cab's roof. Now just need to find a light bar, have the Spod Bantam already to go. The cab rack supports 300 pounds dynamic and 600 pounds static, the rear is 300 pounds dynamic and 500 pounds static. I will be buy the adapta plates over black Friday, think they are running 25% off. 20211112_130008.jpg
 
Top Bottom