- Joined
- Jan 16, 2019
- Messages
- 35
- Age
- 32
Question for you guys. I just went with new UCAs to fix my camber issue in my allignment, however it did not allow me to gain any caster. I'm only able to get about 1.5* of caster out of the front. With that said, I'm looking at a lot of cutting to fit a 35" tire under this thing. The firewall is going to have to come back quite a bit unless I find another alternative.
My other question is bump travel. I'm assuming I will have plenty of rubbing at the top of the wheel well and will either have to limit bump travel (not interested), tub the wheel well? (seems like a lot of work) or look into a small body lift? Thoughts or opinions on what you all have had success with.
Ill tag @eimkeith because you seem to do the most amount of cycling when it comes to clearance.
My other question is bump travel. I'm assuming I will have plenty of rubbing at the top of the wheel well and will either have to limit bump travel (not interested), tub the wheel well? (seems like a lot of work) or look into a small body lift? Thoughts or opinions on what you all have had success with.
Ill tag @eimkeith because you seem to do the most amount of cycling when it comes to clearance.