kasnerd
Danny's Red Headed Step Child
- Joined
- Aug 15, 2019
- Messages
- 4,791
https://www.amazon.com/dp/B07GX5X8F5/Needs an insulated beer can holder for sure!
https://www.amazon.com/dp/B07GX5X8F5/Needs an insulated beer can holder for sure!
That might work even better.
Stick the tab straight up on the ash tray and you know which one isn’t for drinkingHe needs to remember which is the current beer and current ashtray
Stick the tab straight up on the ash tray and you know which one isn’t for drinking
But you know, that’s like too simple of a system…
Every one loves the color what was it again? Gay sailor blue. Nice color for pride month. Inspiration comes in many sizes. I mean ways.I knew everyone was going to love that color. You were close,that’s rust oleum sail blue.
ThanksEvery one loves the color what was it again? Gay sailor blue. Nice color for pride month. Inspiration comes in many sizes. I mean ways.
So you’ll be halfway done to having a pride flag in thereThanks
View attachment 42977View attachment 42978That’s my Regal Red table.
My drill press/grinder table is going to be bright green or yellow. I’m having trouble deciding. I’ll let you know as soon as I decide.
Hmm maybe orange.
That blue was actually Sail Blue, must have been an auto correct thing on your end.
Go yellow. That way you have primary colors.Thanks
View attachment 42977View attachment 42978That’s my Regal Red table.
My drill press/grinder table is going to be bright green or yellow. I’m having trouble deciding. I’ll let you know as soon as I decide.
Hmm maybe orange.
That blue was actually Sail Blue, must have been an auto correct thing on your end.
Sail blue is becoming a legend amongst rattle can colors, so goodI knew everyone was going to love that color. You were close,that’s rust oleum sail blue.
skid plate reinforcement ?
Yepskid plate reinforcement ?
Been doing the same to mine past couple weeks, only mines .125 chromo and .90 gussets. Trying to keep it light and don't need strength like that.Yep
Went with 1/4" flat bar this time.
1/8" didnt work out so well last time.
My truck is heavy and apparently I am stupid.Been doing the same to mine past couple weeks, only mines .125 chromo and .90 gussets. Trying to keep it light and don't need strength like that.
Sounds like yours will probably bend the frame crossmember before it fails at this point. Gonna be crazy strong
Cool, post more pics when it's done plsMy truck is heavy and apparently I am stupid.
Crossmember is already bent.
Luckily the main part of the front skid is supported by the JDFab LCA tab tubes, and I made a mid support that sits right next to the diff. All the ribs are for the part that ties the front bumper into the main skid. Put a nice bend in the last one, so going apeshit on this design. But this skid is still lighter than the last one.