Welders, welding, and stuff

4runner DOA

Hold my beer
Staff member
Joined
Oct 2, 2018
Messages
15,882
Location
OC
Stick the tab straight up on the ash tray and you know which one isn’t for drinking

But you know, that’s like too simple of a system…

When I smoked cigarettes I drank almost exclusively out of bottles so I could see the ashtray.
 
Joined
Nov 13, 2018
Messages
240
Every one loves the color what was it again? Gay sailor blue. Nice color for pride month. Inspiration comes in many sizes. I mean ways.
Thanks
CC3AA418-15B1-4876-871D-375E66411806.jpeg9C97FF3B-D4DC-452F-8A7B-FC72D4565D47.jpegThat’s my Regal Red table.

My drill press/grinder table is going to be bright green or yellow. I’m having trouble deciding. I’ll let you know as soon as I decide.

Hmm maybe orange.

That blue was actually Sail Blue, must have been an auto correct thing on your end.
 

Itaro

Seriously, FJB
Joined
Oct 5, 2018
Messages
13,115
Thanks
View attachment 42977View attachment 42978That’s my Regal Red table.

My drill press/grinder table is going to be bright green or yellow. I’m having trouble deciding. I’ll let you know as soon as I decide.

Hmm maybe orange.

That blue was actually Sail Blue, must have been an auto correct thing on your end.
So you’ll be halfway done to having a pride flag in there :laugh:
 
Joined
Nov 18, 2019
Messages
588
Age
41
Location
Glendale AZ
Thanks
View attachment 42977View attachment 42978That’s my Regal Red table.

My drill press/grinder table is going to be bright green or yellow. I’m having trouble deciding. I’ll let you know as soon as I decide.

Hmm maybe orange.

That blue was actually Sail Blue, must have been an auto correct thing on your end.
Go yellow. That way you have primary colors.
 
Joined
Sep 28, 2020
Messages
119
Location
dirtyjerz
Yep
Went with 1/4" flat bar this time.
1/8" didnt work out so well last time.
Been doing the same to mine past couple weeks, only mines .125 chromo and .90 gussets. Trying to keep it light and don't need strength like that.
Sounds like yours will probably bend the frame crossmember before it fails at this point. Gonna be crazy strong
 

Stairgod

Two bad decisions away from buying a bulldozer
Joined
Apr 22, 2019
Messages
2,439
Been doing the same to mine past couple weeks, only mines .125 chromo and .90 gussets. Trying to keep it light and don't need strength like that.
Sounds like yours will probably bend the frame crossmember before it fails at this point. Gonna be crazy strong
My truck is heavy and apparently I am stupid.
Crossmember is already bent.
Luckily the main part of the front skid is supported by the JDFab LCA tab tubes, and I made a mid support that sits right next to the diff. All the ribs are for the part that ties the front bumper into the main skid. Put a nice bend in the last one, so going apeshit on this design. But this skid is still lighter than the last one.
 
Joined
Sep 28, 2020
Messages
119
Location
dirtyjerz
My truck is heavy and apparently I am stupid.
Crossmember is already bent.
Luckily the main part of the front skid is supported by the JDFab LCA tab tubes, and I made a mid support that sits right next to the diff. All the ribs are for the part that ties the front bumper into the main skid. Put a nice bend in the last one, so going apeshit on this design. But this skid is still lighter than the last one.
Cool, post more pics when it's done pls
 
Top Bottom