Bought a lathe and welding table. Finally put together my swag finger brake and welded an old steering wheel to my bead roller. Also trying to learn tig welding.. I’m not very good and I can’t do a t joint to save my life but we are going with it lol
And last night I ordered the front housing so front axle, springs, steering box, etc is all for sale. Either part out or a killer deal on all of it.
Inner axle shafts and kingpin rebuild are on their way. Have all my heims and brackets I think. Just need hubs, rotors, coilovers and a few other small yet expensive items and I will have everything to get the front done. Plan is to cut the front frame rails off. raise the motor as much as possible and get as much uptravel as possible
Selling my hole front setup. Could essentially buy this, a front and rear hanger from sky’s or wfo or whoever sells a full width hanger and put it all together.
Ruffstuff Toyota axle for sale or part out.
Pretty much everything you can do to one.
Ruffstuff axle housing passenger drop
5.29 high pinion 3rd with Yukon zip locker
Rcv axle shafts and hub gears
Sky’s off-road billet steering arms with 5th stud
Trail gear 4 in hd springs
1.5 1/4 wall steering with fj80 tie rod ends
Psc steering ram limited to Toyota steering
Fror brake mounting with tundra 231 brakes
Spring perches are set for full width at 31.5 inches but could easily be changed by moving driver side perch.
Painted with black steel it
I have a bunch of spares as well. Birfrields, knuckle rebuilds, tie rod ends etc.
Comparable axle would be tg rock assault housing at 6600 dollars.
Asking 5k or best offer and open to all offers. Shipping available if you set up shipping.
Also have tons of extra parts. 5500 for axle and all spare parts and the tapped box. Or make an offer on parts if youneed something
Got the frame plate templates made and one side done on the outside. Was excited to do this but it’s kicking my butt lol need to find some more 3/16 and get it all welded up and then it’s on to engine mount and links